Wire-Line Main Drilling Rig (HF-44A)

I.  CZPT

HF-44A  Core  Drill,  a  new  type  of  product  with increased  capacity,  is  a  kind  of  hydraulic-pushed, spindle, diamond-little bit, tiny-diameter core drill with reasonably potent  drilling  force. It is primarily  suitable for exploration  of steel or non-steel solid mineral ore  bed.  It  is  widely  applied  in  core  drill  with diamond  bit  or  hard  tungsten-carbide-tipped   bit and diamond bit in the subject of geology, metallurgy, coal mine, hydrological  and engineering  drilling. It can  also  be  used  in  the  fields  of  superficial-zone

petroleum  and  natural  gas  mining,  mine  workings  ventilation  and  water  discharge  tunnel  drilling  as  well  as basis  pile  construction  in  large  diameter.  It  is  in  reasonable  structure,  light  weight,  powerful  capacity, multiuse, continual overall performance, higher duty and high standardization and generalization.

one)   Core Drilling

 

Drill Rod Versions		Drill Rod Kind	Drill Depth
Drill Rod Produced in China	Planer in and out	dia43×6mm(one.69×0.24  inch)	1400 m (4592feet)
		dia54×6 mm(2.13×0.24 inch)	a thousand m (3280feet)
		dia67×6 mm(2.64×0.24 inch)	830 m (2722feet)
	Thickened Inner	dia50×5.five mm(one.97×0.22 inch)	1300 m (4264feet)
		dia60×6 mm(2.36×0.24 inch)	950 m (3116feet)
	Extracting Main with   Wire Line	dia55.5×4.73mm(2.19×0.19inch)	1400 m (4592feet)
		dia71×5 mm(2.80×0.20 inch)	a thousand m (3280feet)
		dia89×5 mm(three.50×0.twenty inch)	800 m (2624feet)
DCDMA (Diamond Core Drill Maker Association)  made  Drill Rod	Thickened Internal	BW	1250 m (4100feet)
		NW	one thousand m (3280feet)
		HW	660 m (2165feet)
	Extracting Core with   Wire Line	BQ	1400 m (4592feet)
		NQ	1100 m (3608feet)
		HQ	750 m (2460feet)

two. Drilling Angel ~ to 360°

three. Energy Engine
Electromotor	Y225S~four	37KW(forty nine.62HP)	1480 r/min
Diesel engine	Deutz F6L 912	82KW(110HP)	1500 r/min

4. Rotator

Variety: Feeding with double oil cylinders hydraulic stress, rotating mechanically. Spindle I.D~93   mm (three.sixty six inch)

Pace of spindle:

Velocity of Power eng. (r/min)	1480 (for main drilling)
Optimistic Low Speed (r/min)	83, 152, 217, 316
Good High Speed (r/min)	254, 468, 667, 970
Adverse Pace (r/min)	67, 206

Max. torque of spindle~three.two  KN·m (2358 lbf·ft)

Spindle stroke~600   mm (23.sixty two inch)

Max. lifting force of spindle ~120  KN (26976 lbf)

Max. thrust of spindle~90   KN (25712 lbf)

5. CZPT 

Kind planetary gearing

Wire rope dia~seventeen.5 mm(.sixty nine inch) or 18.five mm(.seventy three inch)

Drum capacity for rope(170 kg/mm2  equivalent to 241839 lb/inch2) ~ (seventeen.5mm steel wire rope)    110m(360.eight feet)

(eighteen.5mm steel wire rope)     90m(295.2 ft) Max. lifting force (one rope)~45 KN (10116 lbf)

Lifting speed of the wire rope

Power eng speed 1000r/min .forty seven .86 1.22 1.78 m/s (1.fifty four 2.eighty two four.00 5.84 toes/s) Electricity eng speed 1500r/min     .70 one.29 1.eighty four two.68 m/s (two.30 4.23 five.90 eight.79 feet/s) Energy eng pace 1700r/min       .805 1.485 two.12 3.08 m/s (2.sixty four 4.87 six.95 10.ten toes/s) 

6. Clutch

Type: Dry single chip friction clutch

7. Gearbox

Kind: sliding gearbox (four speeds are optimistic and 1 is damaging).

8. Oil Pump

Kind: Single Equipment Pump

Displacement        ~32+12  L/min (8.five+three.2 US Gallons/min)

Functioning pressure    ~ to eight  MPa (~1160 psi)

Max. pressure    ~12  MPa (1740 psi)

nine. Water Brake

Operating speed (r/min) ~seven-hundred-800

One rope compensational pace~three–8  m/s (nine.eighty four–26.2 feet/s)

Single rope compensational load~forty five  KN (10116 lbf)

ten. Drill Body

Form sliding skids variety (with sliding base)

Drill backward stroke   ~460  mm (18.11 inch)

11. Proportions (L×W×H) ~3030×1100×1890   mm (119.3×43.3×74.4 inch)

12. Bodyweight of drill (CZPT electrical power device) ~about 2150 kg(4741 lb)

thirteen. Max. bodyweight of dischargeable apparatus ~three hundred kg (662 lb)