1450-Straight line- double aspect-lock-base-four-6corner purpose
Folding Gluing Machine
Characteristics:
one.Driving by synchronous belt,ensure clean and exact working.
two.Inverter driving,secure and energy conserving.
3.Use electric alter,straightforward operate.
4.Computerized steady feeding,use a number of belt with vibrating motor,(for greater configuration use drilled suction belt),to maintain the feeding stable.
five.Computerized counting and kicking,quantity can preset.
six.Conveyer strain adjustable in accordance to the box to make sure very best high quality.
2. Primary complex parameter:
| Model | ZH-M1450 four/six |
| Suited content | AB/BE/A/B/C/E/F flute , Card board210-850gsm |
| Max strategy | Automatic continuous feeding |
| Max mechanical velocity | 300m/min |
| All round dimension | 19700*2300*1650mm |
| Bodyweight | 13.5T |
| Power intake | 27.2KW,380V,50HZ |
| Compressed air | six bar,ten m³/h,sixty L |
Equipment configuration
| Primary motor | GPG |
| PLC | Siemens |
| Inverter | Siemens |
| Contact screen | Siemens |
| Driving CZPT | NSK |
| Simple belt | NITTA Japan |
| Minimal voltage equipment | Schneider( Relays, contactor,breaker,Button) |
| Image Swap | Panasonic |
| Wall thickness | 20m (correct facet,remaining facet) tempered |
| Gluing technique | KQ CHINA |
| Servo motor | Delta (ZheJiang ) for back fold |
| Servo motor | VEICHI China (management the folding area belt)an additional company CZPT it |
Attribute:
1.Feeder Section
·Friction feeder. Independently driven by inverter.
Adjustable digital pile vibrator.
·Lateral feed gates fully adjustable to the width of the blank.
two.Paper Alignment Program:
Unbiased segment that registers the blank to 1 facet ensuring a ideal parallelism ahead of coming into the pre-folding or gluing sections.
Independently driven by motor.
Possibility to sign up on any aspect of the device.
Fast and simple set up.Configuration reducer, distinct boxes when the conversion, the reducer with electric powered regulation
3.Pre-fold Segment:
The pre-fold part has the edge to make the box much more plain and easy to open up,even in some circumstance the scoring is not very effectively.
Left hand glue flap pre-folder up to 180º.
3rd crease pre-folding established up to 135º.
1st and 3rd crease openers.
Configuration reducer, various bins when the conversion, the reducer with electric regulation
4.Base Lock Part
Lock-bottom assembly mechanism with high elastic hookers is of offer style,fast and easy procedure.
·Independently pushed by motor.
Complete set of folding hooks and helixes for smooth and correct folding of front flaps
Adjustable hook rigidity.
Fast and easy setup
Configuration reducer, different boxes when the conversion, the reducer with electrical regulation.
5.Down Gluing section
·Two reduce (still left and correct) gluing tanks.
·Easy to remove and cleanse.
6.Folding Section
Independently pushed by motor.
Smooth and correct folding of 2nd and 4th creases.
Outer folding belts adjustable up to 180º with variable pace managed by inverter
Easy accessibility.
Configure the servo motor to alter the belt velocity,Make the box a lot more neat
7.Trombone Section
·Independently driven by motor.
·Upper and decrease drive system for length adjustment.
·Allows a perfect understack or overstack stream of containers.
·Equipped with automated belt stress-modifying system.
·Continuous and computerized box assortment system that ensures a neat transfer to the Press part, guaranteeing an aligned circulation.
eight.Press Part
·Independently motorized pneumatic press section.
·Upper area moves back and CZPT by way of a motorized system, allowing various box size.
·Pneumatic pressure regulation.
nine.Back-folding unit
·Motorized and untimed electronic back again folding program with intelligent servo-motor technologies.
·Two impartial servo motors, one particular for every single shaft.
·Versatile and easy to setup.
Gluing method
one. Primary technical parameter:
Model HZ4
| Enter voltage | AC220V (±20%)50-60HZ | |
| Power | 480W | |
| Glue-like precision | ±1mm | |
| Gel-level | four varieties | |
| Model | HB6 | |
| Guns | 3 | |
| To adhesives max viscosity | 3000mPas | |
| Every single two-way transport performance | 6:one | |
| Fuel resource enter requirements | two-8bar | |
| Weight | 25kg | |
| Size | 1280*480*600mm |
Plasma Surface area Treatment
Principal technical parameter:
| Design | Thoroughly clean-PL-5571 | |
| Enter voltage | AC220V | |
| Nominal energy | 1500AV | |
| Plasma electricity offer frequency | twenty-30khz | |
| Air supply pressure | 60L/m³ | |
| Dimension | 720*970*1270 | |
| Outlet angle | <20mm | |
| two guns | ||
| Excess weight | 95kg |
