70 Body 15W,12V/24V DC Brush Equipment Motor for Digital Printer
Solution Description:
Equipment Motor-Torque Desk Allowance Torque Device:Upside (N.m)/Belowside (kgf.cm)
•Gearhead and Intermediate gearhead are sold independently.
•Enter the reduction ratio into the blank() inside the model identify.
•The pace is calculated by dividing the motor’s synchronous speed by the reduction ratio. The genuine velocity is 2%~20% much less than the exhibited worth, relying on the measurement of the load.
•To lessen the pace past the reduction ratio in the adhering to desk, connect an intermediate gearhead (reduction ratio: 10) in between the reducer and motor. In that case, the permissible torque is 8N-m.
|
Kind Motor/Gearhead |
Gear Ratio |
three |
three.six |
5 |
6 |
seven.5 |
9 |
12.5 |
fifteen |
eighteen |
twenty five |
30 |
36 |
50 |
sixty |
75 |
ninety |
100 |
120 |
150 |
a hundred and eighty |
|
Velocity r/min |
950 |
791 |
570 |
475 |
380 |
316 |
228 |
190 |
158 |
114 |
ninety five |
79 |
57 |
47 |
38 |
31 |
28 |
23 |
19 |
15 |
|
| Z3D30-24GN(3GN3K) |
4GN()RC/ 4GN()RT |
.16 |
.20 |
.27 |
.33 |
.forty six |
.55 |
.seventy six |
.ninety two |
one.10 |
one.53 |
one.80 |
two.twenty |
three.05 |
three.thirty |
four.12 |
four.95 |
five.fifty |
six.60 |
8.00 |
eight.00 |
|
1.63 |
two.04 |
2.75 |
3.37 |
1.69 |
5.61 |
7.seventy five |
nine.38 |
11.two |
15.six |
18.4 |
22.4 |
31.one |
33.7 |
42. |
fifty.five |
fifty six.one |
67.three |
80. |
80.00 |
Proportions(Device:mm):
Organization Information
FAQ
Q: What’re your major items?
A: We currently produce Brushed Dc Motors, Brushed Dc Equipment Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors, Ac Motors and Higher Precision Planetary Gear Box and so on. You can check the specs for earlier mentioned motors on our internet site and you can electronic mail us to recommend essential motors for each your specification way too.
Q: How to select a ideal motor?
A:If you have motor photographs or drawings to display us, or you have comprehensive specs like voltage, speed, torque, motor dimensions, doing work method of the motor, essential life time and sounds level etc, make sure you do not be reluctant to allow us know, then we can advise appropriate motor for each your request accordingly.
Q: Do you have a CZPT service for your normal motors?
A: Sure, we can customise for every your request for the voltage, pace, torque and shaft measurement/form. If you need extra wires/cables soldered on the terminal or need to insert connectors, or capacitors or EMC we can make it also.
Q: Do you have an specific design provider for motors?
A: Indeed, we would like to design motors individually for our customers, but it could require some mould developing cost and layout charge.
Q: What is your guide time?
A: CZPTly talking, our standard common merchandise will need to have 15-30days, a little bit more time for CZPT merchandise. But we are very adaptable on the lead time, it will depend on the certain orders.
Please make contact with us if you have in depth requests, thank you !
