25W sixty Series of Brushless DC Equipment Motors
Simple Qualities Of Motor
•25W (DC Electricity Offer When Applied To 24VDC/36VDC/48VDC)
|
Rated electrical power (Continuous) |
W |
25 (15W/25W) |
|||
|
Rated velocity |
r/min |
2500 |
|||
|
Rated torque |
N.m |
.096 |
|||
|
Instantaneous greatest torque |
N.m |
.144 |
|||
|
Rotor minute of inertia |
J:X10-4kg.mtwo |
.042 |
|||
|
Speed manage variety |
RPM |
Large strain two hundred-2500RPM (Minimal strain two hundred-3000RPM) |
|||
|
Pace control assortment |
On load |
Below ±1%: condition ~rated torque, rated pace, rated voltage, room temperature |
|||
|
On voltage |
Below±1%: problem rated voltage ±10%, rated velocity, rated load, room temperature |
||||
|
On temperature |
Below±1%: Circumstances of ambient temperature ~+40°C rated voltage, ratod load and rated velocity |
||||
|
Electricity input |
Rated voltage |
V |
One period 110V |
One period 220V | 24VDC(Optiond 36VDC/48VDC) |
|
Voltage tolerance selection |
±10% |
||||
|
Frequency |
Hz |
fifty/sixty |
/ |
||
|
Frequency tolerance assortment |
±5% |
/ |
|||
|
Rated input present |
A |
1. |
.six |
one.seven |
|
|
Instantaneous maximum enter existing |
A |
2. |
one.2 |
two.six |
|
Item Description
Circular Shaft Variety Optical Motor
•Z2BLD25-24GNL-30S(2GN40LC)-Voltage 24/36/48/110/220
•Z2BLD25-24GNL-30S(2GN40LC) Diagram (ZD CZPT Generate)
•Low Voltage Wrie Plughole Corresp-onding Sign Explanation
|
plughole |
1 |
2 |
3 |
4 |
|
signal |
U |
W |
Hv |
Hu |
|
plughole |
five |
six |
seven |
8 |
|
signal |
V |
GND |
Hw |
Vcc |
•Substantial Voltage Wrie Plughole Corresp-onding Signal Explanation
| Corresponding indicating | |||||||||
|
one |
2 |
three |
four |
5 |
6 |
seven |
8 |
nine |
ten |
|
Blue (coarse) |
Yellow (wonderful) |
Yellow (coarse) |
Green (fine) |
Green (coarse) |
Blue (wonderful) |
|
Metallic mesh |
Red (fantastic) |
Black (good) |
|
W |
Hu |
U |
Hv |
V |
Hw |
|
|
Vcc+5V |
GND |
•Parallel Shaft Pace Reducer
Z2BLD25-24GNL-30S(2GN40LC)-Voltage 24/36/forty eight/a hundred and ten/220
1.Connector:5557-8R/10R(MOLEX) 2.The sheath length of guide line 300mm 3.Round terminal:SRA-21T-4(Lower ground)
•Decimal Gearhead
2GN()XK ()-Velocity Ratio Benefit, CZPTly 10
|
Gearhead Product |
Gear Ratio |
L Dimension |
|
2GN()K |
three-eighteen |
32&41 |
|
twenty~two hundred |
41 |
•Enter the gear ratio in the box () in the design name
•Z2BLD25-24GNL-30S(2GN40LC) Equipment Allowable Torque (Device: N.m)
|
Design |
Motor Velocity/Reduction Ratio |
3 |
3.six |
five |
six |
7.5 |
9 |
ten |
twelve.5 |
15 |
eighteen |
20 |
25 |
thirty |
36 |
fifty |
sixty |
75 |
90 |
one hundred |
120 |
one hundred fifty |
180 |
two hundred |
| Z2BLD25-24GNL-30S(2GN40LC) |
two hundred~1500RPM |
.30 |
.36 |
.fifty |
.sixty |
.75 |
.91 |
1.00 |
one.26 |
1.51 |
one.eighty one |
one.eighty one |
two.27 |
two.72 |
three.00 |
three.00 |
three.00 |
three.00 |
3.00 |
three.00 |
three.00 |
3.00 |
three.00 |
3.00 |
|
2000RPM |
.29 |
.35 |
.49 |
.58 |
.seventy three |
.87 |
.97 |
1.21 |
one.forty six |
one.75 |
one.75 |
two.eighteen |
2.sixty one |
3.00 |
three.00 |
3.00 |
three.00 |
three.00 |
three.00 |
three.00 |
3.00 |
three.00 |
three.00 |
|
|
2500RPM |
.23 |
.28 |
.39 |
.forty six |
.fifty eight |
.sixty nine |
.77 |
.ninety seven |
1.sixteen |
1.39 |
one.39 |
one.seventy four |
two.09 |
two.51 |
three.00 |
3.00 |
three.00 |
3.00 |
3.00 |
three.00 |
3.00 |
three.00 |
3.00 |
Notice :The() (gray) in the table indicates that the rotation route is constant with the motor.(The torque underneath various speed and speed ratio is received below the ZD normal.)
•L Kind Speed Reducer
•Z2BLD25-24GNL-30S(2GN40LC) Device Allowable Torque (Device: N.m)
|
Motor Velocity/Reduction Ratio |
five |
ten |
fifteen |
twenty |
30 |
50 |
one hundred |
two hundred |
|
200-1500RPM |
.fifty |
one.00 |
one.fifty one |
2.01 |
2.72 |
4.fifty three |
nine.06 |
sixteen.four |
|
2000RPM |
.43 |
.85 |
1.28 |
one.70 |
2.30 |
three.eighty three |
7.sixty seven |
thirteen.9 |
|
2500RPM |
.35 |
.70 |
1.05 |
one.39 |
two.09 |
three.forty nine |
6.97 |
12.six |
Be aware :All gearbox output turn path in form are opposite as motor turn path.(The torque below distinct pace and pace ratio is acquired under the ZD normal.)
Organization Details
FAQ
Q: What’re your principal products?
A: We at present make Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Equipment Box and so forth. You can verify the specifications for previously mentioned motors on our internet site and you can electronic mail us to suggest necessary motors for every your specification too.
Q: How to decide on a suited motor?
A:If you have motor photographs or drawings to display us, or you have in depth specs like voltage, velocity, torque, motor dimensions, working mode of the motor, necessary life span and sound stage and so on, make sure you do not hesitate to enable us know, then we can advocate suited motor for each your ask for accordingly.
Q: Do you have a CZPT support for your standard motors?
A: Yes, we can customise for every your request for the voltage, pace, torque and shaft dimension/shape. If you require added wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.
Q: Do you have an individual layout provider for motors?
A: Indeed, we would like to style motors individually for our clients, but it could need some mould developing price and layout charge.
Q: What’s your lead time?
A: CZPTly talking, our standard normal product will need to have fifteen-30days, a bit lengthier for CZPT items. But we are extremely flexible on the lead time, it will count on the distinct orders.
Make sure you get in touch with us if you have detailed requests, thank you !
